PoE to USB-C Converter – RJ45 5V/2A Type-C Output IEEE802.3af/at
PoE to USB-C Converter – RJ45 5V/2A Type-C Output IEEE802.3af/at
Power Your 5V USB-C Devices Directly Over Ethernet
The 44V–57V PoE to USB Type-C Converter is the smart, compact solution for powering passive 5V USB-C devices using an existing IEEE 802.3af/at Power over Ethernet infrastructure. No extra power adapters, no cable clutter — just clean, reliable 5V/2A DC output delivered through a standard RJ45 connection and converted to a USB-C (Type-C) port.
Whether you're deploying Raspberry Pi boards, small routers, IP cameras, or any other 5V USB-C device in a network cabinet or remote installation, this converter bridges the gap between high-voltage PoE switches and low-voltage USB-C devices seamlessly.
Key Features
- Wide PoE Input Range: Accepts 44V–57V PoE input, fully compatible with IEEE 802.3af and IEEE 802.3at PoE standards
- Stable 5V/2A Output: Delivers a consistent 5V DC at up to 2A (10W) via USB Type-C port — ideal for passive 5V devices
- RJ45 Input Port: Standard RJ45 jack for direct connection to any PoE switch or PoE injector
- USB-C Output Port: Conveniently powers Type-C compatible devices without needing a separate power supply
- Compact & Lightweight: Approximately 20cm cable length — easy to install in tight spaces, server racks, or wall-mount enclosures
- Plug-and-Play: No drivers or software required — simply connect and power on
- Durable Build Quality: Designed for continuous operation in professional networking environments
Technical Specifications
| Input Voltage | 44V – 57V DC (PoE) |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Output Voltage | 5V DC |
| Output Current | 2A (Max) |
| Output Power | 10W (Max) |
| Input Connector | RJ45 |
| Output Connector | USB Type-C |
| Cable Length | Approx. 20cm |
| Country of Origin | Made in Mainland China |
Who Is This For?
This PoE to USB-C converter is perfect for:
- Network engineers and IT professionals deploying USB-C devices on PoE infrastructure
- Makers and hobbyists powering Raspberry Pi or similar single-board computers via Ethernet
- Smart home and IoT installers who need clean, centralized power distribution
- Anyone looking to eliminate redundant power adapters in a wired network setup
You Might Also Like
- Electromagnetic Induction Tester – Coil & Circuit Fault Detector
- Air Compressor Pressure Gauge 0-10/0-12/0-25 Bar | DIY Tool
- Clip-On Car Fan LED Display 199 Speeds | USB & Type-C
Learn more: OSHA on personal protective equipment
Frequently Asked Questions
Q: What PoE standards does this Type-C PoE converter support?
A: This PoE to USB-C converter is compatible with IEEE 802.3af and IEEE 802.3at standards, accepting an input voltage range of 44V to 57V DC from any compliant PoE switch or PoE injector.
Q: What devices can I power with this RJ45 to USB Type-C converter?
A: It is designed for passive 5V USB-C devices such as Raspberry Pi boards, small networking equipment, IoT modules, USB-C hubs, and other devices that operate at 5V and draw up to 2A (10W). Always verify your device's power requirements before use.
Q: Do I need any special software or drivers to use this PoE converter?
A: No — this is a fully plug-and-play hardware converter. Simply connect the RJ45 end to your PoE switch or injector and plug your USB-C device into the output port. No configuration, drivers, or software are required.
Q: How long is the cable on this PoE to USB-C adapter?
A: The cable length is approximately 20cm, making it compact and easy to route neatly in network enclosures, wall-mount boxes, or server cabinets.