Electric Soldering Iron 220V 100W–300W | Workshop Welding Tool

Electric Soldering Iron 220V – High Power Welding Tool for Workshop & Electronics

Get professional-grade soldering performance with this high-power electric soldering iron. Available in four wattage options — 100W, 150W, 200W, and 300W — this 220V tool is built for demanding workshop tasks, electronics work, PCB assembly, and general metal joining. Whether you're a seasoned technician or a DIY enthusiast, this soldering iron delivers fast heat-up times and consistent temperatures for clean, reliable solder joints every time.

Made in Mainland China.

Key Features

• Four Power Options: Choose from 100W (pointed tip), 150W (pointed tip), 200W (elbow tip), or 300W (elbow tip) to match your soldering needs.
• Quick Heating: Dual-structure heating elements bring the iron up to working temperature fast, reducing downtime on the job.
• Stainless Steel Construction: High-quality stainless steel body with excellent resistance to rust and thermal oxidation for long-lasting durability.
• Glass Fiber Reinforced: Internal glass fiber construction adds structural strength and improves the overall lifespan of the tool.
• Double Insulation Handle: The double-insulated plastic handle keeps your hand comfortable and protected from heat during extended use.
• Moisture Resistant: Designed to resist moisture exposure, keeping performance consistent in varied workshop environments.
• Lightweight & Balanced: Slim, ergonomic profile makes it easy to handle during detailed soldering work.

Specifications

Usage Tips & Precautions

1. Always rest the soldering iron in a stand or holder — never place the hot tip on an unprotected surface.
2. Do not use strongly acidic flux, as it may damage the tip.
3. Never strike the tip with tools such as a hammer — this will cause damage.
4. When re-tinning the tip, lightly polish with fine sandpaper and re-immerse in flux at approximately 250°C for best results.
5. Do not remove electrical components while the iron is powered on.
6. On first use, some light smoke may occur during the initial heat-up as the heating element cures — this is normal and will stop within approximately 10 minutes.
7. Note: This iron uses a China-type plug (220V). If your local outlet is different, please prepare a suitable adapter before use.

Package Contents

• 1 × Electric Soldering Iron

Colors may vary slightly from images due to monitor settings. Minor measurement variations (±1–2mm) may occur.

Related Products You May Like

• Air Compressor Pressure Gauge 0-10/0-12/0-25 Bar | DIY Tool
• Electromagnetic Induction Tester – Coil & Circuit Fault Detector

Learn more: OSHA on personal protective equipment

Frequently Asked Questions

Q: What wattage soldering iron should I choose for electronics work?

A: For delicate electronics, PCB work, and small components, the 100W or 150W pointed-tip options are ideal. For heavier-duty tasks such as joining thicker metals or large copper joints, the 200W or 300W elbow-tip models provide the extra thermal mass needed for clean, strong welds.

Q: Does this soldering iron work in countries outside of China?

A: This soldering iron is rated for 220V / 50Hz power. It is compatible with most countries that use 220–240V mains power. The plug is a China-type (Type A/I), so you may need a plug adapter for your local outlets. It is NOT compatible with 110V supplies (e.g. USA/Canada) without a step-up voltage converter.

Q: Why does the iron produce smoke when first switched on?

A: On the very first use, the heating element may emit a small amount of light smoke as protective coatings on the new element burn off during the initial heat cycle. This is completely normal and will naturally stop within about 10 minutes of use.

Q: Is the handle safe to hold during extended soldering sessions?

A: Yes. The handle features a double-insulation structure that keeps the grip area significantly cooler than the iron's working tip, allowing for comfortable extended use without discomfort.