830-Hole Breadboard Starter Kit – LED, Resistor & Components

Kickstart your electronics journey with this all-in-one 830-Hole Breadboard Beginner Kit. Packed with everything you need to prototype circuits, learn electronics fundamentals, and build real DIY projects — all without a single solder joint. Compatible with UNO R3 and most popular microcontroller boards, this kit is the ideal starting point for students, hobbyists, and makers of all skill levels.

Made in Mainland China.

Why You'll Love This Kit

• 830-Tie-Point Breadboard (MB-102): Spacious solderless breadboard gives you plenty of room to build and test complex circuits with ease.
• Complete Component Assortment: From resistors and capacitors to LEDs, transistors, ICs, and sensors — everything is included so you can start building right out of the box.
• Power Supply Module Included: Provides stable 3.3V/5V output directly on the breadboard — no extra hardware required.
• Extensive Wire Selection: Includes 65 flexible jumper wires, 140 solderless jumper wires, and 20 female-to-male Dupont wires for versatile connections.
• Organised Storage Box: All components arrive neatly packaged so nothing gets lost between projects.
• UNO R3 Compatible: Works seamlessly with Arduino UNO R3 and similar development boards for coding and hardware learning.

Full Package Contents

• 1 × Power Supply Module
• 1 × 830 Tie-Point Breadboard (MB-102)
• 1 × 65-Wire Flexible Jumper Wire Set
• 140 × Solderless Jumper Wires
• 20 × Female-to-Male Dupont Wires
• 2 × 40-Pin Headers
• 1 × Precision Potentiometer
• 2 × Photoresistors
• 1 × Thermistor
• 5 × Diode Rectifier (1N4007)
• 5 × NPN Transistor (PN2222)
• 1 × IC 4N35 (Optocoupler)
• 1 × IC 74HC595 (Shift Register)
• 1 × Active Buzzer & 1 × Passive Buzzer
• 10 × Small Push Buttons
• 10 × 22pF Ceramic Capacitors & 10 × 104 Ceramic Capacitors
• 5 × Electrolytic Capacitor (10µF 50V) & 5 × Electrolytic Capacitor (100µF 50V)
• 10 × White, 10 × Yellow, 10 × Blue, 10 × Green, 10 × Red LEDs + 1 × RGB LED
• Resistors (10 each): 10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ

Great For

• Arduino and microcontroller prototyping
• STEM education and school projects
• Electronics courses and self-study
• Hobbyist circuit design and DIY builds

Looking for other tools and project accessories? Check out our Electromagnetic Induction Tester – Coil & Circuit Fault Detector and the Air Compressor Pressure Gauge – DIY Tool for more hands-on project essentials.

Learn more: OSHA on personal protective equipment

Frequently Asked Questions

Q: Is this breadboard starter kit compatible with Arduino UNO R3?

A: Yes! This 830-hole MB-102 breadboard kit is fully compatible with Arduino UNO R3 and most other Arduino-based microcontroller boards. The included jumper wires and Dupont cables connect directly to standard digital and analog pins, making it straightforward to wire up and test circuits.

Q: Do I need any soldering equipment to use this electronics beginner kit?

A: No soldering is required. The breadboard uses a solderless connection system — simply push component leads and jumper wires into the tie-points to build your circuits. It's designed to be beginner-friendly so you can prototype and modify designs quickly and safely.

Q: How many LEDs and resistors are included in the kit?

A: The kit includes 51 LEDs in total — 10 each of white, yellow, blue, green, and red, plus 1 RGB LED. For resistors, you get 10 pieces in each of 10 different values (10Ω through 1MΩ), giving you 100 resistors in all — more than enough for a wide variety of beginner and intermediate circuit projects.

Q: What power supply options does this kit support?

A: The included power supply module mounts directly onto the 830-hole breadboard and provides selectable 3.3V or 5V DC output. It can be powered via a standard 9V barrel jack or USB, making it versatile for bench use or portable projects.